Hi folks!
I have been experimenting a bit with an ambisonics mic from Core Sound, called Tetra Mic. With it follows some software and especially a VST plug-in to decode the signals. Now, unfortunately, this plug-in makes Pyramix crash (6.1.7 MR1). When I check the plug-in with the VST Scanner it looks OK except that I get a warning saying (exactly): VSTMAN_SetSkeakerArrangement : plug-in does not have speaker arrangement
Does anyone know what this means?
I would also like to know if there's anyone out there who has successfully tested any VST plug-ins for decoding B-format (4-ch) sound files in Pyramix?
Thanks everyone
Per
Ambisonics
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
Ambisonics
Sound Processing AB
Sweden
Sweden
-
Gaël Nicolas
- Posts: 80
- Joined: Wed May 15, 2002 22:45
- Location: Paris France
Re: Ambisonics
hi,
I just red you now, maybe you've already found a solution!
I use ambisonics recording for many years now, i use them with pyramix, when VST was ready.
I use surround zone from soundfield, but for the core sound you shoul use the A format decoder. SPS 200 software.
To solve your problem, do you try different GPS solution? Look at the number of OUTPUT of your plug, you could see that in the vst scanner.
Then try to insert your plug in such a GPS track.
Good luck, and welcomein true surround sound
I just red you now, maybe you've already found a solution!
I use ambisonics recording for many years now, i use them with pyramix, when VST was ready.
I use surround zone from soundfield, but for the core sound you shoul use the A format decoder. SPS 200 software.
To solve your problem, do you try different GPS solution? Look at the number of OUTPUT of your plug, you could see that in the vst scanner.
Then try to insert your plug in such a GPS track.
Good luck, and welcomein true surround sound
Gaël Nicolas
33 Bis Rue du Chateau Landon
75010 PARIS
06 60 28 83 79
Win7 pro/Pyramix V8/ Masscore/Intel X5672 3.2ghz/HP-Z800
33 Bis Rue du Chateau Landon
75010 PARIS
06 60 28 83 79
Win7 pro/Pyramix V8/ Masscore/Intel X5672 3.2ghz/HP-Z800
-
Larry Elliott
- Posts: 537
- Joined: Thu Dec 09, 2004 00:18
- Location: Auckland, New Zealand
- Contact:
Re: Ambisonics
Gaël Nicolas wrote:I use ambisonics recording for many years now, i use them with pyramix, when VST was ready.
I use surround zone from soundfield, but for the core sound you shoul use the A format decoder. SPS 200 software.
Hello Gael,
I am just starting with Ambiosonics - I have access to one of the Tetra Mics, which I plan to use to make some tests then I will get a Soundfield. Do you have any problems with the Soundfield VST software in Pyramix?
Many thanks
Larry
Re: Ambisonics
Hi, sorry for late answer.
I haven't worked with this for a while, but I will do some tests again as soon as there is time.
A strange thing though, that my VST plug-ins work perfectly in PMX Native, but crashes PMX Masscore. Same version.
I'll get back to this.
Per
I haven't worked with this for a while, but I will do some tests again as soon as there is time.
A strange thing though, that my VST plug-ins work perfectly in PMX Native, but crashes PMX Masscore. Same version.
I'll get back to this.
Per
Sound Processing AB
Sweden
Sweden
-
Gaël Nicolas
- Posts: 80
- Joined: Wed May 15, 2002 22:45
- Location: Paris France
Re: Ambisonics
hi,
No problem with soundfield "surround zone" neither with SPS200 dedicated software!
I run 8 of them in my session they are all running with automation...perfect!
If you are into ambisonics i suggest you go and see that www.surround-library.com
i'm a part of that team.
regards!
No problem with soundfield "surround zone" neither with SPS200 dedicated software!
I run 8 of them in my session they are all running with automation...perfect!
If you are into ambisonics i suggest you go and see that www.surround-library.com
i'm a part of that team.
regards!
Gaël Nicolas
33 Bis Rue du Chateau Landon
75010 PARIS
06 60 28 83 79
Win7 pro/Pyramix V8/ Masscore/Intel X5672 3.2ghz/HP-Z800
33 Bis Rue du Chateau Landon
75010 PARIS
06 60 28 83 79
Win7 pro/Pyramix V8/ Masscore/Intel X5672 3.2ghz/HP-Z800