Greetings,
Please correct this silly behavior.
We use catalogue numbers as our project names. Pyramix invariably grabs the trailing digit in the project name, assumes it's a take number and increments it. This is unacceptible. We cannot have _software_ making production decisions.
Unintelligent Take-Name Behavior
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
-
- Posts: 81
- Joined: Wed Jun 15, 2005 20:09
- Location: Cambridge, MA, U. S. A.
-
- Posts: 81
- Joined: Wed Jun 15, 2005 20:09
- Location: Cambridge, MA, U. S. A.
-
- Posts: 81
- Joined: Wed Jun 15, 2005 20:09
- Location: Cambridge, MA, U. S. A.
-
- Posts: 81
- Joined: Wed Jun 15, 2005 20:09
- Location: Cambridge, MA, U. S. A.
No. You would only have one take number per take, but you may have many takes per soundfile name. The differentiator is the take number. You specify a name in one field, a starting take number in another field and then it increments that take starting number, leaving your soundfile name untouched. Does that make sense?
Best regards,
Best regards,
-Bruce
sonicjones wrote:No. You would only have one take number per take, but you may have many takes per soundfile name. The differentiator is the take number. You specify a name in one field, a starting take number in another field and then it increments that take starting number, leaving your soundfile name untouched. Does that make sense?
Best regards,
Hi Bruce, I just came across this today and it and may be a little late, but here is how I do it. (Being an old Sonic guy myself, even the HD dialog is screwed up when compared with the old record soundfile dialog)
But we do it by putting the name with an underscore after it. Pyramix will add "001" after and increment the take there after. If you want to make an adjustment to the sequence, just rename it in the record confirm dialog after the recording and it will keep incrementing from there.
All the best,
mark
*********************
Mark Donahue
Soundmirror, Inc.
Boston, MA
mark@soundmirror.com
www.soundmirror.com
*********************
Mark Donahue
Soundmirror, Inc.
Boston, MA
mark@soundmirror.com
www.soundmirror.com
*********************
-
- Posts: 81
- Joined: Wed Jun 15, 2005 20:09
- Location: Cambridge, MA, U. S. A.