Hi there,
I just did a few experiments with the new MAD, working well so far.
But I am just unable to get any audio on the bridge channels in protools ultimate 2020 native. I don´t get audio on the bridge inputs, also I´m not able to receive in another daw brigde sends from protools.
It´s working fine bridging in both ways from reaper to izotope. Or also from reaper into ddp creator from hofa, or ableton live with reaper. Brigding is working in all my asio hosts in both ways- except for protools, where I do the most of my work.
Is this a know issue, or is it just me? I don´t really need that feature, but it would be very handy at some points.
I´m on win10 64 pro, latest version protools ultimate, one horus with latest firmware, latest mad & aneman sofware.
best, Jonas
Birdge Channels into-from Protools
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
If you need assistance please contact tech support.
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
If you need assistance please contact tech support.
Re: Birdge Channels into-from Protools
For me all routing is ok. I ve tested with Reaper and all good.
Are you doing all in ANEMAN ? you need to first create the propoer settings in MAD.
Check this : https://confluence.merging.com/pages/vi ... d=73662784
Are you doing all in ANEMAN ? you need to first create the propoer settings in MAD.
Check this : https://confluence.merging.com/pages/vi ... d=73662784
Re: Birdge Channels into-from Protools
Yes, I checked all the documents there are.
What do you mean, you checked with reaper? What was the other asio host you used? Sending bridge channels from reaper to protools? Or from protools to reaper?
What do you mean, you checked with reaper? What was the other asio host you used? Sending bridge channels from reaper to protools? Or from protools to reaper?