Hello.
I am having a hard time getting SYNC or anything working between two Macs running Mac OS 15.2 connected via 10 gigabit Ethernet.
I have the VAD Drivers on Both Macs installed, activated, and temporarily licensed.
The ANEMAN Utility indeed sees the two machines.. But I cannot seem to get One of the Macs to become Clock Master.
The goal is to have my live room running LOGIC Pro to utilize MERGING Tools (VAD) via software to the Control room also running Logic Pro.
I did search the forums, and various Internet resources to no avail.
My GOALS are to have RTP Latency as LOW as possible.
Need help figuring HOW to make one of these Macs the Clock Master.. And getting a successful configuration. ** I have had AVB Working in this same scenario but could not LOW Enough RTL Latencies.... Hoping that This tool will do much better.
Any help is greatly appreciated!
Jason
Mac to Mac VAD ... Need a hand ... No Master Clock option?
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
If you need assistance please contact tech support.
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
If you need assistance please contact tech support.
-
RandomPlanet
- Posts: 1
- Joined: Mon Jan 20, 2025 19:12