Hello
I recently bought a pair of 4410a Genelec to be use un AES67 mode withe my Anubis (Top of an Atmos setup), I can see them over the Dante controller but I can't see them directly in Aneman, it seems to discover compatible unit easily but it don't.All The Plug ins in Aneman are Update.
I wouldn't like to use Dante VSC and 48kHz limitation, and manage an integrated control monitoring setup and routing with Aneman.
thanks for any info can be use
config Mac Studio M1 Monterey /Anubis Premium/ Protools
Aneman Genelec 4410a Not discover
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
If you need assistance please contact tech support.
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
If you need assistance please contact tech support.
Re: Aneman Genelec 4410a Not discover
It's seems to be a Ravenna format missing for this model, only AES67 use for the moment, it works perfectly with 8340 model so I contact Genelec.
Wait and see
Wait and see