Mobile Phone Source

[Chris-CA]

Hi Guys, I'm trying to setup the Anubis to accept input from my iPhone 12 Pro on the "3 INST/LINE" source. I have the Apple Lightning to 1/8" female jack adapter and an 1/8" male to 1/4" male cable that connects to the Anubis. I have this source enabled but I only hear some of the audio and most of it is very distorted. I've tried making this mono and stereo and everything I can think of, but to no avail.

Question: Does anyone know how to use a mobile device as a source with the Anubis? I just can't figure it out. I have a microphone connected to MIC/LIN input 1.

[ljudatervinning]

It could be that Anubis input is balanced and the phone output is unbalanced stereo.
Try an adaptor from the phone with two mono teleplugs into ch 3 and 4 on Anubis.

[Chris-CA]

It could be that Anubis input is balanced and the phone output is unbalanced stereo.
Try an adaptor from the phone with two mono teleplugs into ch 3 and 4 on Anubis.

Thanks for the reply. I will see if I can track down such a cable.

The Anubis manual says that both unbalanced and balanced are supported.

"3 & 4. Instrument/Line: 1⁄4” connector Jack can be connected to phone type (unbalanced or balanced) plugs for Hi-Z or Line inputs. For connection to a drum machine, synthesizer, electric guitar (active or passive pickups), electric bass (active or passive pickups), direct box, pedal board or in order to connect an external analog processing chain."

[pepe44]

Did you change the instrument and line input in the Anubis ? either in the web page or the Anubis LCD settings page ?

[Chris-CA]

I got a 1/8” to dual 1/4” cable and it works.

[ljudatervinning]

Great!