Auto release on selected parameters

[pepe44]

Hi all. I´m a new happy Anubis user! Congrats to Merging for making such a portable HIGH quality converter.
There is one little option that could be of great use , for me at least. Let me know if it´s already possible.
When setting the appropriate pre amp /line / intrument gain sometimes it´s easy to forget to de-select the preamp and for some reason we want to raise the main out level . Accidentally we raise the preamps gain again.
Would be nice to have an option that would auto de-select the preamp gain after a short time.
Someone else agree with this ?

Thanks

[Ricardo Ryan]

Hi,

Very glad that you have chosen MERGING+ANUBIS.

Good idea but I worry the oposite culd happen.
In this case I'd rather recommend that you use the Lock feature in the Anubis PreAmps. once the gain is set tap the lock logo in the PreAmps and the gain becomes disabled.

Best Regards,
Ricado Ryan

Merging Technolgoies
Project & QA Manager
Anubis Co-Product Manager

[pepe44]

Hi Ricardo , thanks for your reply.
Locking is an option correct.
Looking forward for the next firmware release! Home merging made some use of FPGA for built in Reverb ,eq and compressor. This would take the unit to another level imo.
It would be a great add for the ANUBIS when recording without having monitoring from the daw.
All the best.

[Ricardo Ryan]

Hi Pepe,

Let's see... stay tuned

Best,
Ricardo Ryan

Merging Technolgoies
Project & QA Manager
Anubis Co-Product Manager