Direct output at mic level?

Forum to discuss your Pyramix systems, motherboards, RAID arrays, graphic cards, laptops, etc..
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
Post Reply
johanneso
Posts: 11
Joined: Wed Mar 05, 2014 12:24

Direct output at mic level?

Postby johanneso » Wed Feb 11, 2015 00:18

Would it be possible somehow to set the Direct Outputs of the ADA8D/ADA8DP to mic level? It would be very useful, even moreso than line level.
Top
dialt1
Posts: 3
Joined: Sun Apr 12, 2015 14:08

Re: Direct output at mic level?

Postby dialt1 » Sun Apr 12, 2015 14:12

please answer someone. im need it know too :(
Top
Perfect Record
Posts: 646
Joined: Thu Apr 24, 2008 06:09
Location: St Paul, Minnesota USA
Contact:
Contact Perfect Record

Re: Direct output at mic level?

Postby Perfect Record » Wed Apr 15, 2015 17:14

I don't own this product, but as with any preamp, the noise floor of a line stage set to the -20 to -50 range would be very high. You might want to consider making resistor pads for each output.

I assume you wish to bring these outputs back into another device which is expecting mic input levels? The other thing to watch out for is blocking phantom power from getting back to the preamp.
Top
Post Reply

Return to “Pyramix Hardware Discussion”