Having been advised in another thread to upgrade my version of Flux Solera v3. I read through all the instructions, went through all the procedures, the files have been placed on the drives in what looks like the right place (but how would I know if they were right or not?). Yet, Solera v3 does not appear in the list as an available VS3 plug-in. So, now what?
Does anyone out there have any ideas?
Oh and before you ask, yes I do have the Solera v3 key
Your's frustrated.
Julian
Installing Flux Solera V3
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
-
Julian Gough
- Posts: 225
- Joined: Fri Apr 11, 2003 00:19
- Location: Stoke Poges, UK
-
Ricardo Ryan
- Site Admin
- Posts: 2554
- Joined: Wed Jul 14, 2004 12:19
- Location: Switzerland
Re: Installing Flux Solera V3
Hi,
Did you do that by using the recommended Flux Center application?
Download Flux Center
https://www.fluxhome.com/download
Go to its settings and select the VS3 you need (Pyramix v9 or v10) and then install them.
Afterwards they should be present when launching Pyramix.
Best Regards,
RIcardo
Did you do that by using the recommended Flux Center application?
Download Flux Center
https://www.fluxhome.com/download
Go to its settings and select the VS3 you need (Pyramix v9 or v10) and then install them.
Afterwards they should be present when launching Pyramix.
Best Regards,
RIcardo