Hi. I'm having serious automation issues in Pyramix V 6.1.6.
Basically, the mixer is refusing to write any automation, in some projects. At other times, automation is written up to a certain point, and then the pyramix mixer seems to loose all connection with the automation data.
Are there any known issues or workarounds for automation?
I can provide a sample project file which demonstrates this if neccessary.
Sion.
issues with Automation in Pyramix 6.1.6
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
-
Ooblecaboodle
- Posts: 32
- Joined: Fri Jan 12, 2007 18:02
- Location: Wales, UK
- Contact:
-
Ricardo Ryan
- Site Admin
- Posts: 2554
- Joined: Wed Jul 14, 2004 12:19
- Location: Switzerland
Re: issues with Automation in Pyramix 6.1.6
Hi,
A known issue was found that seemed to be pointing to some libraries. Could you re-open your project and make sure that you do not open the libraries and see if it works afterwards. Try automating and it should work. Save the project in that state and then slowly start applying one library at a time back in until the faulting one is found. You could also try put the Libraries at another folder level prior to starting Pyramix.
Such issue was fixed for the V6.1 Maintenance Release 1 version due out very soon.
Regards,
Ricardo
Merging Technologies
A known issue was found that seemed to be pointing to some libraries. Could you re-open your project and make sure that you do not open the libraries and see if it works afterwards. Try automating and it should work. Save the project in that state and then slowly start applying one library at a time back in until the faulting one is found. You could also try put the Libraries at another folder level prior to starting Pyramix.
Such issue was fixed for the V6.1 Maintenance Release 1 version due out very soon.
Regards,
Ricardo
Merging Technologies
-
Ooblecaboodle
- Posts: 32
- Joined: Fri Jan 12, 2007 18:02
- Location: Wales, UK
- Contact:
Re: issues with Automation in Pyramix 6.1.6
Thanks for the workaround. It seems that all of our current libraries are causing this, which is a bit of a pain, but at least I now know how to work around the problem.
Any chance of giving us a rough idea when to expect the fix?
Thanks.
Any chance of giving us a rough idea when to expect the fix?
Thanks.
-
Ricardo Ryan
- Site Admin
- Posts: 2554
- Joined: Wed Jul 14, 2004 12:19
- Location: Switzerland
Re: issues with Automation in Pyramix 6.1.6
Hi,
The Fix will be in v6.1 Maintenance Release 1 due out today!
Regards,
Ricardo
Merging Technologies
The Fix will be in v6.1 Maintenance Release 1 due out today!
Regards,
Ricardo
Merging Technologies