Very often Pyramix wont play.
The transport shows play but the time line wont move.
Sometimes I update 1394 in the device manager and after a reboot it will work.
Then it will stop again.
If you have ideas I would appreciate advice...
Wont Play with Fireface.
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
Re: Wont Play with Fireface.
We need way more information about your system before anyone can answer your questions effectively and concisely.
Thanks,
Graemme
Thanks,
Graemme
Graemme Brown
Zen Mastering
1460 Wild Rose Drive
Gabriola Island, BC
Canada V0R 1X5
+1.604.874.9096
"A Horus, A Horus; My Kingdom for a Horus!"
Zen Mastering
1460 Wild Rose Drive
Gabriola Island, BC
Canada V0R 1X5
+1.604.874.9096
"A Horus, A Horus; My Kingdom for a Horus!"
-
Ricardo Ryan
- Site Admin
- Posts: 2554
- Joined: Wed Jul 14, 2004 12:19
- Location: Switzerland
Re: Wont Play with Fireface.
Hi,
I would mainly check the status of the Fireface Settings and make sure that the Sampling Rate & FPS and Buffer Size matches the Pyramix project and settings. Have also a peak at the VS3CtrlPanel buffer size reported.
I use the FF-800 home for personal stuff and I've also been through this. Power cycling the FF is also a common thing on some configurations, at time connecting or disconnecting inputs makes it drop out, check this out for more tips... http://forum.cockos.com/showthread.php?t=73334
Regards,
Ricardo
Merging Technologies
I would mainly check the status of the Fireface Settings and make sure that the Sampling Rate & FPS and Buffer Size matches the Pyramix project and settings. Have also a peak at the VS3CtrlPanel buffer size reported.
I use the FF-800 home for personal stuff and I've also been through this. Power cycling the FF is also a common thing on some configurations, at time connecting or disconnecting inputs makes it drop out, check this out for more tips... http://forum.cockos.com/showthread.php?t=73334
Regards,
Ricardo
Merging Technologies