To Forum Members
I am new to the forum but need help to configure Merging Technologies as a clock slave.
One of my Genelec 8430AIP speakers is a master, but the Merging Technology application needs to be configured as the clock slave indicating a successful clock synch.
How would I configure the Merging RAVENNA/AES67 application to send a RAVENNA compatible stereo audio stream for example at 48 kHz sampling rate at 24 bit word length.
Regards
Merging clock slave
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the bug reporting form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the bug reporting form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
-
Guillaume Defer
- Posts: 12
- Joined: Sat Nov 01, 2014 23:28
Re: Merging clock slave
Hi,
It's relatively simple to connect the Genelec 8430A to a CoreAudio system.
You will access the Speakers Settings in the MTDiscovery (AudioLan Pages).
Then, in the Advanced Pages, select a Session Source for CoreAudio, and the Streams consumers in the Genelec 8430A pages.
Be sure to set the Sampling rate and résolution in the General Settings > Audio configuration Tab to the same as the session.
Best regards,
Guillaume
It's relatively simple to connect the Genelec 8430A to a CoreAudio system.
You will access the Speakers Settings in the MTDiscovery (AudioLan Pages).
Then, in the Advanced Pages, select a Session Source for CoreAudio, and the Streams consumers in the Genelec 8430A pages.
Be sure to set the Sampling rate and résolution in the General Settings > Audio configuration Tab to the same as the session.
Best regards,
Guillaume
- Attachments
-
- Genelec8430A.png (91.53 KiB) Viewed 6262 times
-
- Genelec8430A_1.png (38.19 KiB) Viewed 6262 times
-
- Genelec8430A_2.png (41.65 KiB) Viewed 6262 times
Re: Merging clock slave
Hi,
I do not have the option to select MassCore (on SUPPORT-64) in MT Discovery through the (AUDIOLAN Pages).
In the Advanced Pages of AUDIOLAN and Source Stream settings I have CoreAudio (on marks-mbp)..1 and
inside the dropdown menu another called sap:CoreAudio (on marks-map)..1
When I try to add the Merging Techno... as the Channel 1 Source Stream upon clicking this icon it takes me directly
into the RAVENNA AES67 now! application which I have currently installed.
How would I configure these settings do I need to install the Merging Application "ANEMAN" again which I had removed
earlier then try to add the MassCore as a source option within the Source Stream dropdown menu.
If possible could you provide further screenshots also how do I attach screen shots of my own setting back to yourself
or add them to as an email attachment via the merging forum.
Regards
Mark Ireland
I do not have the option to select MassCore (on SUPPORT-64) in MT Discovery through the (AUDIOLAN Pages).
In the Advanced Pages of AUDIOLAN and Source Stream settings I have CoreAudio (on marks-mbp)..1 and
inside the dropdown menu another called sap:CoreAudio (on marks-map)..1
When I try to add the Merging Techno... as the Channel 1 Source Stream upon clicking this icon it takes me directly
into the RAVENNA AES67 now! application which I have currently installed.
How would I configure these settings do I need to install the Merging Application "ANEMAN" again which I had removed
earlier then try to add the MassCore as a source option within the Source Stream dropdown menu.
If possible could you provide further screenshots also how do I attach screen shots of my own setting back to yourself
or add them to as an email attachment via the merging forum.
Regards
Mark Ireland
Re: Merging ''LIKE'' ''HELP''
To Forum,
Would anyone ''LIKE'' to comment on this post and if they are running AES67 RAVENNA with Genelec 8430AIP Monitors on a Mac based system.
This has been an issue for me the last member to post a reply was helpful but I am new to streaming audio over IP and would be grateful
for any further ''HELP'' on setting these monitors with Merging Technologies ANEMAN, MTDiscovery, and the Merging RAVENNA/AES67 application.
Regards
Would anyone ''LIKE'' to comment on this post and if they are running AES67 RAVENNA with Genelec 8430AIP Monitors on a Mac based system.
This has been an issue for me the last member to post a reply was helpful but I am new to streaming audio over IP and would be grateful
for any further ''HELP'' on setting these monitors with Merging Technologies ANEMAN, MTDiscovery, and the Merging RAVENNA/AES67 application.
Regards
-
charlienyc
- Posts: 395
- Joined: Wed Aug 16, 2006 22:40
- Location: chicago, il
- Contact:
Re: Merging clock slave
Hi Mark,
Although the forum can be a helpful tool, it best to also reach out to Merging directly at support@merging.com
Cheers
Although the forum can be a helpful tool, it best to also reach out to Merging directly at support@merging.com
Cheers
MassCore v14.0.5 Win10/64 i9-10900 & i9-11900K, Avid S3
3x Horus = 80 In/24 Out @PCM
Native V14 Win10/64 i7-12700K miniDSP UDIO-8, Avid S1 & nob controller
Native V14 Win10/64 ThinkPad P51 i7-7700HQ w/Hapi
3x Horus = 80 In/24 Out @PCM
Native V14 Win10/64 i7-12700K miniDSP UDIO-8, Avid S1 & nob controller
Native V14 Win10/64 ThinkPad P51 i7-7700HQ w/Hapi