Hapi as a monitor level controller.

Forum to discuss your Pyramix systems, motherboards, RAID arrays, graphic cards, laptops, etc..
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the tech support request form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!
Munki
Posts: 1
Joined: Tue Aug 30, 2011 07:16

Hapi as a monitor level controller.

Postby Munki » Tue Sep 20, 2016 00:03

Hello good people.
I am looking to upgrade my rooms monitoring and am considering the hapi box for the DA stage and as level controller (volume knob!). I will be sending my stereo monitoring feed from DAW to ravenna network to some speaker management / cross over software that is hosted on a second computer. The crossover will result in 6 channels (tri amping) and so will return the data to the hapi box via ravenna. I assume this is all feasible from using the advanced routing mode in ravenna but wanted to put this infront of you all incase I have missed something. (I am in New Zealand without access to a demo unit).

Supplimentary questions!:
Is there a way to have the volume controller attenuate only 6 of the 8 DA channels in a card. (ie. In the above scenario can I use the remaining 2 DA channels to feed an analog recording chain without their level changing along with the monitoring system)?

Does the rotary encoder when in volume control mode do its work in the analog domain or the digital. i.e.. Is it software based attenuation pre the DA or is it analog circuitry post the DA (this question also applies to the headphones).

Thanks in advance for your thoughts / experiences.
Mike Gibson.

ljudatervinning
Posts: 69
Joined: Tue May 05, 2015 00:00
Location: Sweden

Re: Hapi as a monitor level controller.

Postby ljudatervinning » Tue Oct 18, 2016 12:09

As far as I know, you can not control DA-channels individually, only a full module.
It would be awesome though if you could offset the level of each channel independently and control the volume with the rotary controller.
As I understand, the ESS Sabre chip (the DAC-chip), can be used as a level controller, and being very good at that. A guess this is what Merging does.
Level control in digital domain will far outperform an analog controller, if implemented right.

Headphone and DA-board will be controlled independently.
Pyramix Native 11.1.5 / Ravenna ASIO 11.1.5
win10 Pro 1803 / Nvidia GTX 670, 3 monitors
win10 Pro 1803 / Lenovo P50, 4K

crossby
Posts: 3
Joined: Mon Oct 10, 2016 08:40

Re: Hapi as a monitor level controller.

Postby crossby » Fri Oct 28, 2016 10:56