Page 1 of 1

HAPI + ProTools 11 no output connection

Posted: Mon Jul 06, 2015 16:16
by OlleGrane
Hi!

I´m running (most successfully) a HAPI (w. 8 mic input / 8 line output combined card) + Pyramix 9 system but when running Pro Tools 11 (native) I don´t get any output connection through Easy Connect. Input is fine and sounds good when playing session back on another ASIO device (RME Babyface).
In the Easy Connect app: Left window, everything is green, Right window - inputs are all green, outputs are half green (left led, not right, is lit).

What ever disconnecting / reconnecting I try, nothing works. It won´t connect the outputs. The Pro Tools software mixer is showing signal input on both input strip and master channel.
This is not a problem in Pyramix, only in Pro Tools.
I´m only trying to get a headphone output, but no output is available through the Ravenna.

- Any suggestions?

Re: HAPI + ProTools 11 no output connection

Posted: Mon Jul 06, 2015 17:52
by mpdonahue
Check you r firewall settings.....
All the best,
-mark

Re: HAPI + ProTools 11 no output connection

Posted: Thu Jul 09, 2015 09:51
by OlleGrane
mpdonahue wrote:Check you r firewall settings.....
All the best,
-mark


Thanks mpdonahue - firewall settings and an upgrade of firmware took care of it - it now works great! :D
Thanks to Merging for the simple user interface when upgrading the HAPI, super smooth! 8)

/Olle