IOS Touch Controllers

3rd Party controllers used with Merging products
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the bug reporting form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!

IOS Touch Controllers

Postby Ben Wood » Wed Feb 06, 2013 15:59

Its just a bit of fun but I've been experimenting with using TouchOSC and AC7CoreMini on an iPhone to control Pyramix

TouchOSC works great using TouchOSC Bridge and mapping the incoming Midi to the Pyramix mixer. Slightly labourious but its very responsive.

Drawbacks are
- fader resolution, only 0-127 so you get pretty huge steps. I did think about using a 2 byte message like pitch bend for greater accuracy but can't find anything on the net
- faders not touch sensitive so when you release it still writes automation till stop.

AC7CoreMini works using rtpMidi and setup it up in Pyramix as a Mackie Control controller.
It integrates well with faders and transport and all the setup is done for you.
The main issue is the lag, it unusable at the moment. Theres a good second or two delay between moving the fader and seeing a result.
Also it suffers from the same touch automation fader issue as with TouchOSC

AC7CoreMini would be great if not for the huge lag, I cant understand the difference in responsiveness between TouchOSC and AC7Core. Both over the same WiFi connection to the same DAW. I dont have access to the HD version of AC7 on an iPad. Looking at youtube videos, it looks fine when controlling Logic or PT.

Any thoughts welcomed

Ben Wood
Ben Wood
 
Posts: 12
Joined: Mon Jul 20, 2009 12:38

Re: IOS Touch Controllers

Postby OlleGrane » Mon Feb 17, 2014 07:23

Hi!
I use Neyrinck V-Control with an iPad2 for Pro Tools 11 (and it works prefectly, the app is written for a selection of daw´s, unfortunately not PMX) and I´m looking into getting it to work with Pyramix as well. So far I can get it to do a lot of the stuff (without lag) but can´t seem to get the meters going right, only one is showing any sign of life and I´m not sure what it represents... Strangely the ProTools - setting in the V-Control app works better than the Mackie HUI - setting. I´ll experiment some more.
Anyway, Neyrinck suggests that you should turn off Bluetooth connectivity on the iPad since it uses the same radio bus and therefore makes the connection slower, which results in lagging. Might be worth a try? :idea:

Having a wifi remote on a cheap iPad is really great! :D
Olle Grane
Green Hat Music & Sound

Pyramikx V9.1 Native
Win 7 PC according to the Merging spec of june 2010 with RAID 1+0 audio drive 1TB
HP Elitebook 8440p native
Merging HAPI / RME Babyface interfaces
OlleGrane
 
Posts: 28
Joined: Mon Sep 29, 2008 19:15

Re: Xbox controller on iOS 7 devices?

Postby OlleGrane » Tue Dec 27, 2016 13:33

elizabeth0012 wrote:Is there way can i connect Xbox controllers on to the my iPhone 6s or iPod mini touch 6th Generation? My iPhone and iPod are jailbroken. Thanks in advance my friend so worried about his assignment so please guide which is best online paper writing service provder and good in assignment writing


- ?!
Sorry, I fail to see what relation to the remote controll of Pyramix this has...
Olle Grane
Green Hat Music & Sound

Pyramikx V9.1 Native
Win 7 PC according to the Merging spec of june 2010 with RAID 1+0 audio drive 1TB
HP Elitebook 8440p native
Merging HAPI / RME Babyface interfaces
OlleGrane
 
Posts: 28
Joined: Mon Sep 29, 2008 19:15


Return to 3rd Party controllers

Who is online

Users browsing this forum: No registered users and 1 guest

cron