Euphonix Artist

3rd Party controllers used with Merging products
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the bug reporting form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!

Euphonix Artist

Postby Filmsat59 » Fri Mar 20, 2009 12:57

Hi,
we've been doing some mixing using a Euphonx Artist controlling a Pyramix.
As the Artist only works on a Mac computer at the moment, we used a mac as the "bridge" between the artist and pyramix.
the Control is excellent, and the artist behaves really well - the soft keys are really handy on the control unit too.
However, a major problem has been the memory usage. For some reason the Pyramix process doubles its memory usage when running the Artist.
Large projects become unstable and the system is stresses too much, particularly when saving projects.
Apparently this is because the system is not fully supported by euphonix yet (the mac "bridge" works, but is not the ideal solution).
hopefully Euphonix will update their code to work on PC in the near future and make this a viable controller for Pyramix systems.

Graham
Filmsat59.com
Pre and Post production Services
Bristol
UK
User avatar
Filmsat59
 
Posts: 411
Joined: Tue Sep 06, 2005 18:14

Re: Euphonix Artist

Postby Mario » Mon Mar 23, 2009 03:19

Thanks for your input!

Mario
Mario
 
Posts: 112
Joined: Sun Nov 19, 2006 23:44

Re: Euphonix Artist

Postby a.stinson » Thu Mar 26, 2009 03:55

Thanks for the info Graham.

I was reading this article: http://www.thelikelystory.com/articles/ ... ries-on-pc which explains how to setup a mac bridge for the Euphonix, glad to hear it functions with Pyramix as well.

Does this mean you still need the Eucon license key on you Pyramix system? I'm sure that's not a cheap cost option... :(
a.stinson
 
Posts: 41
Joined: Wed Apr 09, 2008 04:55

Re: Euphonix Artist

Postby florian » Tue Jun 09, 2009 11:31

The Artist controller needs the OASIS Protocol Eco Class key which is the cheapest key of the OASIS range keys.

F.Baume
Merging Technologies
florian
 
Posts: 68
Joined: Wed May 29, 2002 10:02
Location: Lausanne Switzerland

Re: Euphonix Artist

Postby Filmsat59 » Fri Dec 18, 2009 18:54

Just an update:

the system is now a lot more stable using the artist with Pyramix release MR2 and the Artist. We have had recent success running the two again, but still using a mac as a bridge.
the latest Euphonix software doesnt seem to work, but 1.4.1 works fairly well.

Still waiting for the PC drivers for the artist though.....

graham
Filmsat59.com
Pre and Post production Services
Bristol
UK
User avatar
Filmsat59
 
Posts: 411
Joined: Tue Sep 06, 2005 18:14

Re: Euphonix Artist

Postby AxL » Mon Jan 25, 2010 20:18

After speaking with Euphonix, they say they dont want to go on with PC compatible software/drivers for the Artist Serie. :evil:

I hope they will change their mind..

anything else we can do :?:
User avatar
AxL
 
Posts: 8
Joined: Wed Apr 28, 2004 15:06
Location: Geneva / Switzerland - Berlin / Germany

Re: Euphonix Artist

Postby klaukholm » Mon Jan 25, 2010 23:13

Brilliant! the swedish distributor had in their official writeup on it that pc drivers were a month away way back when.
here is the pdf from the dealer promising PC support for september 2008
http://www.gearslutz.com/board/attachme ... phonix.pdf
klaukholm
 
Posts: 488
Joined: Fri Jul 29, 2005 00:36
Location: Stockholm, Sweden

Re: Euphonix Artist

Postby Björn » Tue Feb 16, 2010 10:52

Hi,

i tried controlling pyramix with the MC artist, but it didn't work. I have a better result with the EuConWS 1.4.2 driver than the newest 2.5

The 2.5 make Pyramix crash when setting Eucon in controller setting
The 1.4.2 crash at the start of windows ( mc client and eucondiscovery both crash ).Grahame say that it work with the 1.4.1 version.

Anyone have the EuConWS 1.4.1 installer?

And about the PC driver for the Artist serie, euphonix will not make one, they probably have some arrangement with Apple.

Best regard
Björn
 
Posts: 3
Joined: Wed Apr 04, 2007 21:59

Re: Euphonix Artist

Postby DougA » Wed Apr 14, 2010 00:39

Just to twist the knife, Avid (digidesign) has announced, at NAB, that it is purchasing Euphonix as of the end of April 2010. That should really speed up PC development for the Artist series.(and if you believe that .....)
User avatar
DougA
 
Posts: 71
Joined: Sun Jun 09, 2002 22:49
Location: Houston, TX


Return to 3rd Party controllers

Who is online

Users browsing this forum: No registered users and 1 guest

cron