Merging clock slave

3rd Party controllers used with Merging products
Forum rules
The Merging Technologies team cannot be held responsible for support queries logged on the public forums. If a support query is logged here and only here, it may not be found and dealt with by the appropriate team.
To ensure that your support issue or bug report is dealt with properly and in good time, please use the link to the bug reporting form page on the Merging website.
Make sure to let us know what version you are using when you send your mail. THANKS!

Merging clock slave

Postby VividM » Wed Jul 19, 2017 18:38

To Forum Members

I am new to the forum but need help to configure Merging Technologies as a clock slave.

One of my Genelec 8430AIP speakers is a master, but the Merging Technology application needs to be configured as the clock slave indicating a successful clock synch.
How would I configure the Merging RAVENNA/AES67 application to send a RAVENNA compatible stereo audio stream for example at 48 kHz sampling rate at 24 bit word length.

Posts: 4
Joined: Wed Jul 19, 2017 18:23

Re: Merging clock slave

Postby VividM » Fri Jul 21, 2017 11:35


Posts: 4
Joined: Wed Jul 19, 2017 18:23

Re: Merging clock slave

Postby Guillaume Defer » Fri Jul 21, 2017 12:07


It's relatively simple to connect the Genelec 8430A to a CoreAudio system.
You will access the Speakers Settings in the MTDiscovery (AudioLan Pages).
Then, in the Advanced Pages, select a Session Source for CoreAudio, and the Streams consumers in the Genelec 8430A pages.
Be sure to set the Sampling rate and résolution in the General Settings > Audio configuration Tab to the same as the session.

Best regards,
Genelec8430A.png (91.53 KiB) Viewed 3593 times
Genelec8430A_1.png (38.19 KiB) Viewed 3593 times
Genelec8430A_2.png (41.65 KiB) Viewed 3593 times
Guillaume Defer
Posts: 12
Joined: Sat Nov 01, 2014 23:28

Re: Merging clock slave

Postby VividM » Fri Jul 21, 2017 17:04


I do not have the option to select MassCore (on SUPPORT-64) in MT Discovery through the (AUDIOLAN Pages).

In the Advanced Pages of AUDIOLAN and Source Stream settings I have CoreAudio (on marks-mbp)..1 and
inside the dropdown menu another called sap:CoreAudio (on marks-map)..1
When I try to add the Merging Techno... as the Channel 1 Source Stream upon clicking this icon it takes me directly
into the RAVENNA AES67 now! application which I have currently installed.

How would I configure these settings do I need to install the Merging Application "ANEMAN" again which I had removed
earlier then try to add the MassCore as a source option within the Source Stream dropdown menu.
If possible could you provide further screenshots also how do I attach screen shots of my own setting back to yourself
or add them to as an email attachment via the merging forum.


Mark Ireland
Posts: 4
Joined: Wed Jul 19, 2017 18:23

Re: Merging ''LIKE'' ''HELP''

Postby VividM » Fri Jul 28, 2017 17:46

To Forum,

Would anyone ''LIKE'' to comment on this post and if they are running AES67 RAVENNA with Genelec 8430AIP Monitors on a Mac based system.
This has been an issue for me the last member to post a reply was helpful but I am new to streaming audio over IP and would be grateful
for any further ''HELP'' on setting these monitors with Merging Technologies ANEMAN, MTDiscovery, and the Merging RAVENNA/AES67 application.

Posts: 4
Joined: Wed Jul 19, 2017 18:23

Re: Merging clock slave

Postby charlienyc » Fri Jul 28, 2017 17:56

Hi Mark,
Although the forum can be a helpful tool, it best to also reach out to Merging directly at
2x MassCore v11.0.6 Win7/64 i5-3450
3x Horus for 72 In / 24 out in PCM
Native V11 Win10/64 Xeon 3520 2.67GHz RME HDSP MADI
Native V11 Win10/64 ThinkPad P51 i7-7700HQ w/Hapi, iFi iDSD nano
Native V11 Win10 Bootcamp Mac Mini i5-4278U
User avatar
Posts: 367
Joined: Wed Aug 16, 2006 22:40
Location: chicago, il

Return to 3rd Party controllers

Who is online

Users browsing this forum: No registered users and 2 guests