Page 1 of 1

masscore grafic redraw and 4k grafic card suggestion

Posted: Wed Mar 23, 2016 14:31
by bemi
Hi et all,


as mentioned in another thread, several years ago, some users have graphic problems:

There are also mixer redraw issues after moving the mixer around on the screen during playback. Perhaps it's a graphic-card specific issue?


i have those problems on my new workstation, too. I use the on board graphics adapter of a merging recommended gigabyte mainboard. Problem was there in PMX9, as still is in PMX10, too. Any hints?

As i installed a 4k Display shortly, i'd be happy for some suggestions regarding grafic cards? I'd like to have 4k@60Hz via display port, preferrably without active cooling (noise!) at low power consumption, but without problems on a masscore system ;)


Thanks a lot.


best
bemi

Re: masscore grafic redraw and 4k grafic card suggestion

Posted: Wed Mar 23, 2016 14:43
by klaukholm
I would have a look at the FirePro W4100 for 4k work.
It is Merging certified/tested and gives you four Mini DisplayPort 1.2 outputs

Re: masscore grafic redraw and 4k grafic card suggestion

Posted: Sat Mar 26, 2016 22:21
by bemi
Thank you, klaukholm,


i just ordered this card, too, and i'm looking forward to testing it ;)



bemi

Re: masscore grafic redraw and 4k grafic card suggestion

Posted: Sun Mar 27, 2016 08:29
by DJS
I am running PMX10 Native on W10 at 4K (3840x2160) via displayport (1.2) happily with the stock Intel HD Graphics on the Intel DQ77MK motherboard. There doesn't appear to be a need for a fancy graphics card for PMX on 4K monitors. However there is a need for a mod to the manifest file to prevent tiny icons. I expect this will be fixed in the near future.
viewtopic.php?f=54&t=11274

Re: masscore grafic redraw and 4k grafic card suggestion

Posted: Sun Mar 27, 2016 23:08
by Larry Elliott
There can be problems with Masscore on standard Intel graphics.