Page 1 of 1

Mic pre with Ramses

PostPosted: Thu May 13, 2010 05:48
by Masato.Y
Hello colleagues,

Dose anyone Know good mic pres remote controllable from Ramses?
Any suggetions would be appreciated.

Thanks!

Masato.Y

Re: Mic pre with Ramses

PostPosted: Thu May 13, 2010 14:49
by J.Wajer
You mean an OASIS controlled Mic Pre-amplifier? I dont think they exist.

Re: Mic pre with Ramses

PostPosted: Fri May 14, 2010 15:34
by Masato.Y
Thank you Jaap.

I have found it from the Ramses brochure that "Sphynx 2 is the ulitimate choice and remote controllable from Ramses MSC." and "4 to 8 channel mic pre option at all sample rates including DSD".
Do you know what dose it mean?

Masato.Y

Re: Mic pre with Ramses

PostPosted: Fri May 14, 2010 20:28
by Mario
Hi Masato,

The Sphynx only has an RS-422 port for control, having said that, they also came (or you shall ask for) with a RS-422 to USB or RS-422 to ethernet adaptor, you will need it to control the converter with an apllication called Dadman. this application can be launch in the same pyramix computer.

Dadman will "offer the resource" to other applications like Eucon protocol and MIDI, from this point is just a matter of configuration to make them work.

With the Millennia HV-3R and the Grace M802, both MIDI controllable you need pyramix to send MIDI messagges at Ramses commands, I believe this is doable

hope this can bring some ideas

regards

Re: Mic pre with Ramses

PostPosted: Mon May 17, 2010 03:35
by Masato.Y
Thank you Mario for your good Information.

Both HV-3R and AX24(=Sphynx2) have remote control application for PT.
I wonder why do they not have it for PMX? :?

Cheers!

Masato.Y